⚠️ Important Notice: We are currently unable to ship to USA due to import tariff regulations.

We will resume USA shipping once the situation is resolved.

All Products

3899 products

  • APS SDU 2.0 e-Silver Edge Version 2 V2 Gearbox QD Quick Change Spring System For M4 M16 Series AEG Rifles Airsoft Rear Wired APS SDU 2.0 e-Silver Edge Version 2 V2 Gearbox QD Quick Change Spring System For M4 M16 Series AEG Rifles Airsoft Rear Wired

    APS APS SDU 2.0 e-Silver Edge Version 2 V2 Gearbox QD Quick Change Spring System For M4 M16 Series AEG Rifles Airsoft Rear Wired

     

    - APS SDU 2.0 eSilver Edge V2 Gearbox QD Quick Change Spring System For M4 Series AEG Rifle Rear Wire - Made out of high strength zinc alloy. - Updated S.D.U. 2.0 chipset to manage shot-to-shot amperage draw (gearbox only pulls 11amps at 380 FPS) for improved consistency, performance, and instantaneous trigger response making this one of the most efficient stock gearboxes on the market. - Reinforced Shell, Polished and Buffed surface improves smoothness. - Quick Change Spring System. - Ambidextrous cams and gears included. - Built-in MOSFET. - Prevent Corrosion. - 8mm Bearing Bushings, Bearing Piston Head and Bearing Spring Guide used. - Ported cylinder optimized for carbine length inner barrels (363mm). - Comes with micro switch trigger works together with the S.D.U.?? providing you an instant trigger response when shooting. - The Quick Change Spring Guide has 4 locking legs instead of 2 which is different from the existing spring guide found in the market which further secure the spring while shooting. - Wired to the rear with a Deans style T-plug.,The rear wires of the gearbox were braided with PET sleeving provides extra protection for the wires. - Comes with full steel teeth piston that increase the durability of gearbox too. - Comes with Non Blow Back function. User can simply switch to EBB (Electric Blow Back) function by changing the recoil plate. Switching between AEG and EBB is easy, no special tools and skills required. - Suitable for APS ambidextrous M4 Series AEG Rifles. - Compatible with Tokyo Marui spec M4 AEG rifles (a bit modification may needed) , and some other brand with same Tokyo Marui spec M4 Series AEG Rifles. - Weight - Approx 566g - Original Packing

    Read more

     

    £111.00

  • APS Edge II Micro FET Version 2 V2 Gearbox QD Quick Change Spring System For M4 M16 Series AEG Rifle Airsoft Rear Wired APS Edge II Micro FET Version 2 V2 Gearbox QD Quick Change Spring System For M4 M16 Series AEG Rifle Airsoft Rear Wired

    APS APS Edge II Micro FET Version 2 V2 Gearbox QD Quick Change Spring System For M4 M16 Series AEG Rifle Airsoft Rear Wired

     

    - APS Edge II Micro FET V2 Gearbox QD Quick Change Spring System For M4 Series AEG Rifle Rear Wire - Made out of high strength zinc alloy. - Quick change spring system. - Built in Micro FET. - Prevent Corrosion. - MOSFET improves overall performance of your AEG gun. - Fine tune switch., Increase the sensity of the switch and very high response of fire. - Full steel teeth piston. - Stainless steel ported cylinder., The interior of the cylinder is made smoothly., The opened port is optimized for both bore up / non-bore set up of your gearbox. - Aluminium cylinder head with double O-rings. - Compatible with ratio 18:1 16:1 13:1 gears. - Suitable for APS M4 Series AEG Rifles. - Compatible with Tokyo Marui spec M4 AEG rifles (a bit modification may needed) , and some other brand with same Tokyo Marui spec M4 Series AEG Rifles. - Weight - Approx 590g - Original Packing

    Read more

     

    £104.00

  • APS QD Gearbox Quick Change Spring System For APS KU Series Tokyo Marui AUG Series AEG Rifles Airsoft APS QD Gearbox Quick Change Spring System For APS KU Series Tokyo Marui AUG Series AEG Rifles Airsoft

    APS APS QD Gearbox Quick Change Spring System For APS KU Series Tokyo Marui AUG Series AEG Rifles Airsoft

     

    - APS QD Gearbox Quick Change Spring System For APS KU Series Tokyo Marui AUG AEG Rifle- Made out of metal.- Quick change spring system.- Reinforced Shell.- 7mm Bearing Bushings, Bearing Piston Head and Bearing Spring Guide.- Designed for APS KU Series AUG AEG Rifles.- Compatible with Tokyo Marui AUG AEG Rifle.- Weight - Approx 464g- Original Packing

    Read more

     

    £45.00

  • APS Rocket Edge II 8mm High Cycle Version 2 V2 Gearbox For APS ASR Tokyo Marui M4 M16 Series AEG Rifle Airsoft Rear Wired APS Rocket Edge II 8mm High Cycle Version 2 V2 Gearbox For APS ASR Tokyo Marui M4 M16 Series AEG Rifle Airsoft Rear Wired

    APS APS Rocket Edge II 8mm High Cycle Version 2 V2 Gearbox For APS ASR Tokyo Marui M4 M16 Series AEG Rifle Airsoft Rear Wired

     

    - APS Rocket Edge II 8mm High Cycle Version 2 Gearbox For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Rear Wire - Made out of high strength zinc alloy. - Rear Wired version. - Quick change spring system. - Built in Micro FET. - 13:1 CNC Cut Steel Gear Set. - Comes with 31000 RPM Rocket ultra speed motor. - Reinforced steel full teeth piston. - Double O-ring aluminum cylinder head. - Stainless steel ported cylinder. - Standard Deans connector. - 8mm bearings. - M120 spring. - Hybrid electric blowback design (can be disabled simply by changing the mock bolt). - Compatible with ratio 18:1 16:1 13:1 gears , M140 Spring , High Torque Motor. - Suitable for APS ASR Series M4 M16 AEG Rifles. - Compatible with Tokyo Marui spec M4 AEG rifles (a bit modification may needed) , and some other brand with same Tokyo Marui spec M4 Series AEG Rifles. - Weight - Approx 747g - Original Packing

    Read more

     

    £151.00

  • APS PEW Inscription Upper Lower Body Receiver For V2 Version 2 Gearbox M4 M16 Series AEG Rifles Airsoft APS PEW Inscription Upper Lower Body Receiver For V2 Version 2 Gearbox M4 M16 Series AEG Rifles Airsoft

    View options

    APS APS PEW Inscription Upper Lower Body Receiver For V2 Version 2 Gearbox M4 M16 Series AEG Rifles Airsoft

     

    - APS PEW Inscription Upper and Lower Metal Body Receiver For V2 M4 M16 Series AEG - Made out of metal. - PEW Inscription Receiver. - Comes with Ambi Magazine Release Catch, Fire Selector, Bolt Release Catch, Body Pins, Charging Handle and screws. - Suitable for APS V2 Gearbox (with Quick Change Spring Features). - Firing Inscription: No Pew / PEW / PEW PEW PEW - Weight - Approx 465g - Original Packing

    Read more

     

    £94.00

    View options

  • APS CNC Milled PEW Inscription Upper Lower Body Receiver For V2 Version 2 Gearbox M4 M16 Series AEG Rifles Airsoft APS CNC Milled PEW Inscription Upper Lower Body Receiver For V2 Version 2 Gearbox M4 M16 Series AEG Rifles Airsoft

    View options

    APS APS CNC Milled PEW Inscription Upper Lower Body Receiver For V2 Version 2 Gearbox M4 M16 Series AEG Rifles Airsoft

     

    - APS CNC Milled Light Weight PEW Inscription Upper and Lower Metal Body Receiver For V2 M4 M16 Series AEG - Made out of metal. - PEW Inscription Receiver. - Comes with Ambi Magazine Release Catch, Fire Selector, Bolt Release Catch, Body Pins, Charging Handle and screws. - Suitable for APS V2 Gearbox (with Quick Change Spring Features). - Firing Inscription: No Pew / PEW / PEW PEW PEW - Weight - Approx 450g - Original Packing

    Read more

     

    £99.00

    View options

  • APS Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Airsoft Black APS Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Airsoft Black

    APS APS Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Airsoft Black

     

    - APS Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles. - Made out of metal alloy. - For M4A1 extended battery buttstock. - Suitable for APS ASR Series M4 M16 AEG rifle. - Suitable for Tokyo Marui M4 M16 series airsoft AEG rifle. - Color - Black - Weight - 575g - As always, upgrading AEG require necessary skill & technique, consult expertise if needed. - Original Packing

    Read more

     

    £50.00

  • APS Logo Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Airsoft APS Logo Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Airsoft

    View options

    APS APS Logo Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Airsoft

     

    - APS Logo Upper Lower Body Receiver For APS ASR Tokyo Marui M4 M16 Series AEG Rifles Airsoft. - Made out of metal alloy. - For M4A1 extended battery buttstock. - Suitable for APS ASR Series M4 M16 AEG rifle. - Suitable for Tokyo Marui M4 M16 series airsoft AEG rifle. - Weight - 575g - As always, upgrading AEG require necessary skill & technique, consult expertise if needed. - Original Packing

    Read more

     

    £50.00

    View options

  • APS Lower Body Receiver (Folding Stock Version) ASK AK Series AEG Rifles Airsoft Black APS Lower Body Receiver (Folding Stock Version) ASK AK Series AEG Rifles Airsoft Black

    APS APS Lower Body Receiver (Folding Stock Version) ASK AK Series AEG Rifles Airsoft Black

     

    - APS ASK AK-Series AEG Metal Body Lower Receiver (Folding Stock Version) - Metal Construction. - Metal AK Lower Receiver Body - Press Stamping (Punching) in manufacturing the lower receiver. - Suitable for APS ASK Series and other AK AEG rifle that using folding stock. - Color - Black - Weight - Approx 660g - Original Packing

    Read more

     

    £28.00

  • APS Lower Body Receiver (Fixed Stock Version) ASK AK Series AEG Rifles Airsoft Black APS Lower Body Receiver (Fixed Stock Version) ASK AK Series AEG Rifles Airsoft Black

    APS APS Lower Body Receiver (Fixed Stock Version) ASK AK Series AEG Rifles Airsoft Black

     

    - APS ASK AK-Series AEG Metal Body Lower Receiver (Fixed Stock Version) - Metal Construction. - Metal AK Lower Receiver Body - Press Stamping (Punching) in manufacturing the lower receiver. - Suitable for APS ASK Series and other AK AEG rifle that using Fix stock. - Color - Black - Weight - Approx 722g - Original Packing

    Read more

     

    £34.00

  • CYMA CNC Aluminum Upgrade Power Up Kit For M24 CM705 Series Sniper Rifles Airsoft

    CYMA CYMA CNC Aluminum Upgrade Power Up Kit For M24 CM705 Series Sniper Rifles Airsoft

     

    - CYMA CNC Aluminum Upgrade Power Up Kit For M24 M705 Series Sniper Rifles Airsoft - Made out of CNC Aluminum - M170 spring - CNC Aluminum bearing spring guide rod and piston (light weight design) - Power Up to 500-550 fps - Suitable for CYMA M24 CM705 Series Airsoft - Includes Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide - As always, upgrading Airsoft rifle require necessary skill & technique, consult expertise if needed - Note: FPS measurements according to manufacturer data, actual results may vary - Weight - Approx 77g - Original Packing

    Read more

     

    £15.00

  • CYMA CNC Aluminum Upgrade Power Up Kit For CM700 M40A3 Series Sniper Rifles Airsoft

    CYMA CYMA CNC Aluminum Upgrade Power Up Kit For CM700 M40A3 Series Sniper Rifles Airsoft

     

    - CYMA CNC Aluminum Upgrade Power Up Kit For CM700 M40A3 Series Sniper Rifles Airsoft.- Made out of metal. - CNC Aluminum bearing spring guide rod and piston (light weight design).- Suitable for CYMA CM700 M40A3 Series Sniper Rifle.- Easy Installation and more than 20% power increase, up to 500-550 fps.- Includes Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide.- As always, upgrading Airsoft rifle require necessary skill and technique, consult expertise if needed.- Note: FPS measurements according to manufacturer data, actual results may vary.- Weight - Approx 66g - Original Packing

    Read more

     

    £17.00

  • CYMA CNC Aluminum Upgrade Power Up Kit For CM701 VSR-10 Series Sniper Rifles Airsoft

    CYMA CYMA CNC Aluminum Upgrade Power Up Kit For CM701 VSR-10 Series Sniper Rifles Airsoft

     

    - CYMA CNC Aluminum Upgrade Power Up Kit For CM701 VSR-10 Series Sniper Rifles Airsoft. - Made out of metal. - CNC Aluminum bearing spring guide rod and piston (light weight design). - Suitable for CYMA CM701 VSR10 Series Sniper Rifle. - Easy Installation and more than 20% power increase, up to 500-550 fps. - Includes Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide. - As always, upgrading Airsoft rifle require necessary skill and technique, consult expertise if needed. - Note: FPS measurements according to manufacturer data, actual results may vary. - Weight - Approx 63g - Original Packing

    Read more

     

    £17.00

  • CYMA CNC Aluminum Upgrade Power Up Kit For CM702 M24 SWS Series Sniper Rifles Airsoft

    CYMA CYMA CNC Aluminum Upgrade Power Up Kit For CM702 M24 SWS Series Sniper Rifles Airsoft

     

    - CYMA CNC Aluminum Upgrade Power Up Kit For CM702 M24 SWS Series Sniper Rifles Airsoft.- Made out of metal. - CNC Aluminum bearing spring guide rod and piston (light weight design).- Suitable for CYMA CM702 M24 SWS Series Sniper Rifle.- Easy Installation and more than 20% power increase, up to 500-550 fps.- Includes Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide.- As always, upgrading Airsoft rifle require necessary skill and technique, consult expertise if needed.- Note: FPS measurements according to manufacturer data, actual results may vary.- Weight - Approx 69g - Original Packing

    Read more

     

    £17.00

  • CYMA CNC Aluminum Upgrade Power Up Kit For CM703 L96 L96A1 Series Sniper Rifles Airsoft

    CYMA CYMA CNC Aluminum Upgrade Power Up Kit For CM703 L96 L96A1 Series Sniper Rifles Airsoft

     

    - CYMA CNC Aluminum Upgrade Power Up Kit For CM703 L96 L96A1 Series Sniper Rifles Airsoft. - Made out of metal. - CNC Aluminum bearing spring guide rod and piston (light weight design). - Suitable for CYMA CM703 L96 L96A1 Series Sniper Rifle. - Easy Installation and more than 20% power increase, up to 500-550 fps. - Includes Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide. - As always, upgrading Airsoft rifle require necessary skill and technique, consult expertise if needed. - Note: FPS measurements according to manufacturer data, actual results may vary. - Weight - Approx 69g - Original Packing

    Read more

     

    £17.00

  • WE (WE-TECH) Upgrade Power Up Kit For KATANA System Gearbox Airsoft

    WE (WE-TECH) WE (WE-TECH) Upgrade Power Up Kit For KATANA System Gearbox Airsoft

     

    - WE (WE-TECH) Upgrade Power Up Kit For KATANA System Gearbox Airsoft. - Made out of metal and polymer. - High performance upgrade kit set. - Heavy duty polycarbonate piston with steel front teeth. - Aluminum piston head. - CNC stainless steel bushings. - 15 teeth steel alloy sector gear. - CNC stainless bearing - Steel selector switch plate. - Upgraded spring guide. - 15 full teeth piston (three steel front teeth). - Designed for upgrade WE (WE-TECH) KATANA system series gearbox. - Weight - Approx 90g - Original Packing

    Read more

     

    £35.00

  • PPS CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

    PPS PPS CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

     

    - PPS CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles - Made out of CNC Aluminum. - CNC Aluminum bearing spring guide rod and piston (light weight design) - Suitable for Maruzen Type96, APS2, WELL MB01, MB04, MB05, Echo1 ASR, Javelin M24, Snowwolf M24, Snowwolf M99, LRSA, Shadow Op sniper rifles, and other bolt ACTION sniper rifles with Maruzen APS/APS2/Type96 internal systems - Easy Installation and more than 20% power increase, up to 500-550 fps - Includes Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide - As always, upgrading Airsoft rifle require necessary skill & technique, consult expertise if needed - Note: FPS measurements according to manufacturer data, actual results may vary - Weight - Approx 65g - Original Packing

    Read more

     

    £18.00

  • E&C CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

    E&C E&C CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

     

    - E&C CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles. - Made out of Aluminum - Power up kit for airsoft sniper rifle. - Aluminum bearing spring guide rod and piston (light weight design). - Suitable for Maruzen Type96, APS2, WELL MB-01, MB-04, MB-05, Echo1 ASR, Javelin M24, Snowwolf M24, Snowwolf M99, LRSA, Shadow Op sniper rifles, and other bolt ACTION sniper rifles with Maruzen APS/APS2/Type96 internal systems. - Easy Installation and more than 20% power increase, up to 500-550 fps. - Included Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide. - As always, upgrading Airsoft rifle require necessary skill & technique, consult expertise if needed. - Note: FPS measurements according to manufacturer data, actual results may vary. - Weight - Approx 58g - Original Packing

    Read more

     

    £18.00

  • WELL CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

    WELL WELL CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

     

    - WELL CNC Aluminum Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles - Made out of Aluminum. - Power up kit for airsoft sniper rifle. - Aluminum bearing spring guide rod and piston (light weight design). - Suitable for Maruzen Type96, APS2, WELL MB-01, MB-04, MB-05, Echo1 ASR, Javelin M24, Snowwolf M24, Snowwolf M99, LRSA, Shadow Op sniper rifles, and other bolt ACTION sniper rifles with Maruzen APS/APS2/Type96 internal systems. - Easy Installation and more than 20% power increase, up to 500-550 fps. - Included Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide. - As always, upgrading Airsoft rifle require necessary skill & technique, consult expertise if needed. - Note: FPS measurements according to manufacturer data, actual results may vary. - Weight - Approx 92g - Original Packing

    Read more

     

    £18.00

  • E&C Plastic Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

    E&C E&C Plastic Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles

     

    - E&C Plastic Upgrade Power Up Kit For L96 Type Maruzen Type96 APS2 WELL MB01 MB04 MB05 Echo1 ASR Javelin M24 Snowwolf M24 Snowwolf M99 LRSA Series Sniper Rifles - Made out of Plastic & Metal - Power up kit for airsoft sniper rifle. - Plastic spring guide rod and piston (light weight design). - Suitable for Maruzen Type96, APS2, WELL MB-01, MB-04, MB-05, Echo1 ASR, Javelin M24, Snowwolf M24, Snowwolf M99, LRSA, Shadow Op sniper rifles, and other bolt ACTION sniper rifles with Maruzen APS/APS2/Type96 internal systems. - Easy Installation and more than 20% power increase, up to 500-550 fps. - Included Upgrade Spring, Upgrade Piston, Upgrade Spring Guide. - As always, upgrading Airsoft rifle require necessary skill & technique, consult expertise if needed. - Note: FPS measurements according to manufacturer data, actual results may vary. - Weight - Approx 65g - Original Packing

    Read more

     

    £15.00

  • PPS CNC Aluminum Upgrade Power Up Kit For BAR-10 VSR-10 MB03 MB07 BAR-10 TSD M700 Matrix Series Sniper Rifles

    PPS PPS CNC Aluminum Upgrade Power Up Kit For BAR-10 VSR-10 MB03 MB07 BAR-10 TSD M700 Matrix Series Sniper Rifles

     

    - PPS CNC Aluminum Upgrade Power Up Kit For BAR-10 VSR-10 MB03 MB07 BAR-10 TSD M700 Matrix Series Sniper Rifles - Made out of CNC Aluminum. - M170 spring - CNC Aluminum bearing spring guide rod and piston (light weight design) - Power Up to 500-550 fps - Suitable for: BAR-10 / VSR-10 / TSD M700 / Matrix / WELL MB03 & MB07 Series Airsoft Sniper Rifle - Includes Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide - As always, upgrading Airsoft rifle require necessary skill & technique, consult expertise if needed - Note: FPS measurements according to manufacturer data, actual results may vary - Weight - Approx 67g - Original Packing

    Read more

     

    £18.00

  • WELL CNC Aluminum Upgrade Power Up Kit For BAR-10 VSR-10 MB03 MB07 BAR-10 TSD M700 Matrix Series Sniper Rifles

    WELL WELL CNC Aluminum Upgrade Power Up Kit For BAR-10 VSR-10 MB03 MB07 BAR-10 TSD M700 Matrix Series Sniper Rifles

     

    - WELL CNC Aluminum Upgrade Power Up Kit For BAR-10 VSR-10 MB03 MB07 BAR-10 TSD M700 Matrix Series Sniper Rifles - Made out of Aluminum. - Power up kit for airsoft sniper rifle. - M170 spring. - Aluminum bearing spring guide rod and piston (light weight design). - Power Up to 500-550 fps. - Suitable for: BAR-10 / VSR-10 / TSD M700 / Matrix / WELL MB03 & MB07 Series Airsoft Sniper Rifle. - Included Upgrade Spring, Upgrade Piston, Upgrade Ball Bearing Spring Guide. - As always, upgrading Airsoft rifle require necessary skill & technique, consult expertise if needed. - Note: FPS measurements according to manufacturer data, actual results may vary. - Weight - Approx 66g - Original Packing

    Read more

     

    £18.00

  • CYMA 2pcs Pack XL-Size M4 Magazine Style 6mm BB Speed Loader

    CYMA CYMA 2pcs Pack XL-Size M4 Magazine Style 6mm BB Speed Loader

     

    - CYMA 2pcs Pack XL-Size M4 Magazine Style 6mm BB Speed Loader. - Made out of ABS material - A new invention to make airsoft skirmish more fun. - Tired of carrying BB during game, this BB Loading Tool would make your day easy. - Make reloading your airsoft magazine as easy as mechanical pencil. - Simply pour BB into the loader, align nozzle to magazine feed tube, then just push the pump. - No more messy BB handling & no need to carry the fragile long BB loading rod around. - Hold up to 470rd of BB. - Can fit into all rifle magazine pouches. - Work with all airsoft magazine including AEG, Sniper Rifle, Shotgun, Pistol & revolver...etc. - Design to work with Electric, Gas & Spring Pistol Magazine. - Suitable for both Plastic & Metal 6mm BB. - Color - Transparent Brown - Weight - 83g x 2pcs - Comes in two pieces - Original Packing.

    Read more

     

    £9.00

  • PTS Odin Innovations M12 Sidewinder Speed Loader (1600rd Capacity) PTS Odin Innovations M12 Sidewinder Speed Loader (1600rd Capacity)

    View options

    PTS PTS Odin Innovations M12 Sidewinder Speed Loader (1600rd Capacity)

     

    - PTS Odin Innovations M12 Sidewinder Speed Loader (1600rd Capacity) - Made out of Reinforced Polymer. - Ultra Tough Gear Less Direct Drive. - With the quick spin of a crank. - Almost any M4 mid-cap magazine can be fully loaded very rapidly. - Allows you to load six PTS EPM1 AEG (or twelve normal mid-caps) before needing to refill. - Compact size fits perfectly inside any double M4 magazine pouch to easily be carried in to the field. - Each rotation of the crank loads 12 BBs. - Integrated winding clutch prevents magazine overfilling. - Reinforced components that are optimized for use with the PTS EPM1 series such as EPM1 and EPM1-S. - The o-ring-less nozzle reduces loading pressure and facilitates smoother feeding. - Compatible with Tokyo Marui M4 AEG Rifle. - Overall Measurement - 183mm x 46mm x 63mm - Weight - Approx 217g - Original Packing

    Read more

     

    £38.00

    View options

  • APS 3pcs BB Loader Adaptor For APS X1 Xtreme GBox Series GBB Rifles Airsoft Magazine Red

    APS APS 3pcs BB Loader Adaptor For APS X1 Xtreme GBox Series GBB Rifles Airsoft Magazine Red

     

    - APS 3pcs BB Loader Adaptor For APS X1 Xtreme GBox Series GBB Rifles?Airsoft Magazine - Made out of plastic. - Suitable for Co2 magazine of APS X1 Xtreme GBox Series GBB Ultimate Pistol Rifle. - Weight - Approx 15g (5g each) - Original Packing

    Read more

     

    £12.00

  • Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

    View options

    DR. BLACK Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

     

    - Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Made out of CNC Aluminum. - Ultra light weight design. - Comes with Red Green Fiber Optic rod. - Suitable For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Full length - Approx 40mm - Weight - Approx 8g - Original Packing

    Read more

     

    £65.00

    View options

  • Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 4.3 Series GBB Pistols Airsoft Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 4.3 Series GBB Pistols Airsoft

    View options

    DR. BLACK Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 4.3 Series GBB Pistols Airsoft

     

    - Dr. Black CNC Aluminum Fiber Optic Rear Sight For Tokyo Marui Hi-Capa 4.3 Series GBB Pistols. - Made out of CNC Aluminum. - Ultra light weight design. - Comes with Red Green Fiber Optic rod. - Suitable For Tokyo Marui Hi-Capa 4.3 Series GBB Pistols. - Full length - Approx 25mm - Weight - Approx 4g - Original Packing

    Read more

     

    £36.00

    View options

  • BBT 6pcs 1.5mm 2mm Fiber Optic Rod Green Red Orange

    BBT BBT 6pcs 1.5mm 2mm Fiber Optic Rod Green Red Orange

     

    - BBT 6pcs 1.5mm 2mm Fiber Optic Rod Green Red Orange. - Made out of Durable Fiber. - 1.5mm x 3pcs (Green / Red / Orange) , 2mm x 3pcs (Green / Red / Orange) - Color - Green / Red / Orange - Original Packing

    Read more

     

    £12.00

  • BBT Aluminum Fiber Optic Front Rear Sight Set For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

    BBT BBT Aluminum Fiber Optic Front Rear Sight Set For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

     

    - BBT Aluminum Fiber Optic Front Rear Sight Set For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Made out of Aluminum. - Light weight design. - Comes with 3pcs of 1.5mm Fiber Optic rod (Green / Red / Orange). - Suitable for Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Color - Black - Weight - Approx 12g - Original Packing

    Read more

     

    £33.00

  • BBT Aluminum Fiber Optic Front Sight For Tokyo Marui Hi-Capa Series GBB Pistols Airsoft

    BBT BBT Aluminum Fiber Optic Front Sight For Tokyo Marui Hi-Capa Series GBB Pistols Airsoft

     

    - BBT Aluminum Fiber Optic Front Sight For Tokyo Marui Hi-Capa Series GBB Pistols. - Made out of Aluminum. - Light weight design. - Comes with 3pcs of 1.5mm Fiber Optic rod (Green / Red / Orange). - Suitable for Tokyo Marui Hi-Capa Series GBB Pistols. - Color - Black - Weight - Approx 3g - Original Packing

    Read more

     

    £22.00

  • 5KU CNC Aluminum Built-In Fiber Optic Front Sight Silencer Adaptor Kit -14mm CCW Thread For Action Army AAP01 GBB Pistols Airsoft 5KU CNC Aluminum Built-In Fiber Optic Front Sight Silencer Adaptor Kit -14mm CCW Thread For Action Army AAP01 GBB Pistols Airsoft

    View options

    5KU 5KU CNC Aluminum Built-In Fiber Optic Front Sight Silencer Adaptor Kit -14mm CCW Thread For Action Army AAP01 GBB Pistols Airsoft

     

    - 5KU CNC Aluminum Built-In Fiber Optic Front Sight Silencer Adaptor Kit -14mm CCW Counter-clockwise Thread For Action Army AAP01 GBB Pistols. - Made out of CNC aluminum. - Light weight design. - Built-In front sight with red and green Fiber Optic rod. - -14mm CCW counter-clockwise thread. - Suitable For Action Army AAP01 Series GBB Pistols. - Weight - Approx 48g - Original Packing.

    Read more

     

    £17.00

    View options

  • Action Army MIM Fiber Optics Rear Sight For AAP01 AAP01C Series GBB Pistols Airsoft Action Army MIM Fiber Optics Rear Sight For AAP01 AAP01C Series GBB Pistols Airsoft

    View options

    ACTION ARMY Action Army MIM Fiber Optics Rear Sight For AAP01 AAP01C Series GBB Pistols Airsoft

     

    - Action Army MIM Fiber Optics Rear Sight For AAP01 AAP01C Series GBB Pistols. - Made out of metal. - Comes with green Fiber Optic rod. - Suitable For Action Army AAP01 AAP01C Series GBB Pistols. - Color - Black - Full length - Approx 25mm - Weight - Approx 12g - Original Packing

    Read more

     

    £22.00

    View options

  • Cybergun Fiber Optic Plate with Charging Handle For Cybergun CANiK TP9 Series GBB Pistols Airsoft Cybergun Fiber Optic Plate with Charging Handle For Cybergun CANiK TP9 Series GBB Pistols Airsoft

    View options

    CYBERGUN Cybergun Fiber Optic Plate with Charging Handle For Cybergun CANiK TP9 Series GBB Pistols Airsoft

     

    - Cybergun Fiber Optic Plate with Charging Handle For Cybergun CANiK TP9 Series GBB Pistols. - Made out of metal. - Comes with screws and hex key. - Easy to mount Dot Sight or other Fiber Optics on the pistol. - Suitable for Cybergun CANiK TP9 series GBB Pistols. - Compatible with Vortex Viper , Venom , Docter-style , Burris Fastfire and Trijicon RMR red dot sights. - Full length - Approx 50mm - Weight - Approx 65g - Original Packing

    Read more

     

    £33.00

    View options

  • AIP Aluminum Front Rear Fiber Optic Sight V2 For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

    AIP AIP Aluminum Front Rear Fiber Optic Sight V2 For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

     

    - AIP Aluminum Front Rear Fiber Optic Sight V2 For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Made out of Aluminum. - Light weight design. - Comes with Red and Green Fiber Optic rod. - Suitable for Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Color - Black - Weight - Approx 18g - Original Packing

    Read more

     

    £35.00

  • AIP Aluminum Front Rear Fiber Optic Sight V3 For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

    AIP AIP Aluminum Front Rear Fiber Optic Sight V3 For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols Airsoft

     

    - AIP Aluminum Front Rear Fiber Optic Sight V3 For Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Made out of Aluminum. - Light weight design. - Comes with Red and Green Fiber Optic rod. - Suitable for Tokyo Marui Hi-Capa 5.1 Series GBB Pistols. - Color - Black - Weight - Approx 18g - Original Packing

    Read more

     

    £35.00

  • AIP Aluminum Front Rear Fiber Optic Fixed Carry Sight For Tokyo Marui G17 Series GBB Pistols Airsoft

    AIP AIP Aluminum Front Rear Fiber Optic Fixed Carry Sight For Tokyo Marui G17 Series GBB Pistols Airsoft

     

    - AIP Aluminum Front Rear Fiber Optic Fixed Carry Sight For Tokyo Marui G17 Series GBB Pistols. - Made out of Aluminum. - Light weight design.- Comes with Red and Green Fiber Optic rod.- Suitable For Tokyo Marui G17 Series GBB Pistols.- Color - Black - Weight - Approx 25g- Original Packing

    Read more

     

    £35.00

Featured Products

Footer image

© 2026 Airsoft Specter,

  • GB (GBP £) GB (GBP £)
  • English - flag English - flag
    • English - flag
    • Deutsch - flag
    • français - flag
  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Login

Forgot your password?

Don't have an account yet?
Create account